![]() ![]() This is because they use the same IC for many installed units and keep it a heavy guarded secret. If you forget your IC, your alarm company probably won't give it to you. The installer code (IC) is the code that allows you to access the system programming. ![]() Knowing these codes can be helpful for accessing a panel after it has reset to factory default.1. Every alarm system brand has a standard default Installer Code and Master Code. Each needs to have its own unique four-digit number. It should be noted that the Installer Code and the Master Code on a panel can never be the same. These codes can perform basic arming and disarming functions, as well as zone bypassing, and they are a good way to allow a person to reliably arm and disarm the panel, without having to provide them with the Master Code. In addition to Master and Installer codes, there are also User Codes. The Master Code can always disarm the system, even if it was not armed using that code. From there, you can add, edit and delete user codes, change the master code, view the event log, set the system clock, program keypad macros, set scheduled events and activate output devices like triggers and relays. In addition to arming and disarming the alarm system, the Master Code provides access to a user menu. The Master Code is the primary code for the alarm system. ![]() Additionally, the Installer Code can never be used to disarm a system, unless it was the code used to arm the system in the first place. The Installer Code can also change the Master Code, but it cannot assign any other user codes. This menu allows users to add and program new devices, change system settings, and change delay times. When the Installer Code is entered on a panel, the user will be taken to a different menu than if they enter their Master Code. Honeywell L5100: The difference between the Master Code and Installer Code ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
March 2023
Categories |